Richmond Department of Fire and Emergency Services

Richmond Department of Fire and Emergency Services

City of Richmond, Virginia

(4) KME Predator Severe Service Pumpers

www.richmondgov.com

SPECIFICATIONS

GSO | 9917-20
Chassis | 96″ KME Predator Severe Service LFD
Wheelbase | 189″
Travel Height | 114″ (9′-6″)
Travel Length | 368″ (30′-8″)
Seating Capacity | 6-person (5-SCBA)
Front Axle / Susp. | Meritor MFS-20 /Leaf spring w/Monroe Magnum shocks rated @ 20,000 lbs.
Rear Axle / Susp. | Meritor RS-26-185 / Leaf spring rated @ 31,000 lbs.
Additional Features

  • Line-X cab interior
  • Custom EMS cabinet between engine tunnel and rear wall of cab
  • On-Spot automatic tire chains
  • David Clark 3800 Series vehicle intercom system
  • Rosco DV230 Dual-Vision XC event recording system
  • Federal Signal color backup camera w/5.6″ color monitor
  • ROM V4 LED ground lights, multiple shelves and trays
  • Custom paint, lettering and graphics by KME

Warning Lights

  • Whelen Freedom 82″ LED lightbar
  • Whelen 45B20 LED lightbar – front of cab
  • Whelen Super-LED cab/body warning lights
  • Whelen TAL85 48″ LED Traffic Advisor

Audible Warning

  • (2) 24″ Hadley E-Tone air horns
  • Whelen 295HFS2 200-watt electronic siren
  • Federal Q2B electro-mechanical siren
  • (1) Federal Signal ES100C 100-watt siren speaker

Lighting

  • (2) Whelen Pioneer Plus PCP2 150W, 12V LED scene lights – front of cab
  • (2) FRC Spectra Q20 telescoping LED scene lights – dunnage area
  • (1) Whelen Pioneer Plus PCPSM1C LED scene light -driver’s side rear of body

Engine | Cummins ISL9 400 HP
Transmission | Allison 3000 EVS, 5-speed automatic
Fire Pump | Waterous CSU 1,500 GPM single-stage, mid-ship mounted, side mount control panels
Water Tank  500 gallons
Gauges | Class 1
Body | KME Challenger 3/16″ formed aluminum
Ladders | Duo-Safety: (1) 24′ 2-section, (1) 14′ roof, (1) 10′ attic

Intakes

  • (1) 6″ on each pump panel, front bumper and rear of body
  • (1) 2-1/2″on L/S pump panel

Discharges

  • (2) 2-1/2″ on L/S pump panel
  • (1) 2-1/2″ and (1) 3″ on R/S pump panel
  • (2) 1-1/2″ front bumper
  • (2) 2-1/2″ and (1) 1-1/2″ rear of body
  • (1) 3″ monitor over pump

Hoseload

  • Front Bumper: 150′ and 200′ of 1-3/4″
  • L/S Running Board – 50′ of 2-1/2″
  • R/S Running Board – 25′ of 4″
  • Hosebed – 200′ of 1-3/4″, 200′ of 2-1/2″, 500′ of 2-1/2″, 1,000′ of 4″, 500′ of 2-1/2″, 200′ of 1-3/4″

Compartment Configuration

  • Full height/reduced depth on L/S, Low height/full depth on R/S
  • Amdor painted roll-up doors

For More Information Contact Scott Zingaro